Amphitheater LED Light Bar Modifications

From MakerCave
Jump to navigation Jump to search

Drill four holes perpendicular to the pole hardware mounting holes.

Measurements

From each end, drill a 1/2" hole through the aluminum tube:

  • 7.5" from the end
  • 27.5" from the end

Time

  • 45 minute for each LED light bar

Total Pieces

  • 16 LED light bars
    • One completed on April 8, 2013
    • One completed on April 10, 2013
    • One completed on April 14, 2013
    • One completed on April 15, 2013
    • One completed on April 19, 2013
    • One completed on April 20, 2013
    • Two completed on April 28, 2013
    • Four completed on May 4, 2013