QuickDraw Bot

From MakerCave
Jump to navigation Jump to search
Supplier: QuickDraw
  • Supplier: QuickDraw
  • Starting Inventory: 1
  • Model: Information Needed
  • Serial Number: Information Needed

URL: http://quickdraw.local

When on the same LAN only

Settings

Plotter

Frame

  • Frame Width: 735mm
  • Frame Height: 710mm

Canvas

  • Canvas Width: 470mm
  • Canvas Height: 470mm
  • Home Y Position Offset: -20mm

Motors

  • Left Motor Steps/MM: 32.8
  • Right Motor Steps/MM: 32.8
  • Motor Move Speed (MM/SEC): 75
  • Motor Draw Speed (MM/SEC): 75

Other

  • Tension Factor: 1

Hardware

Left Motor

  • Step Pin Number: #24
  • Direction Pin Number: #25
  • Enable Pin Number: #23
  • Invert Direction: Check
  • Min Step Period (microseconds): 125

Right Motor

  • Step Pin Number: #27
  • Direction Pin Number: #22
  • Enable Pin Number: #17
  • Invert Direction: Uncheck
  • Min Step Period (microseconds): 125

Pen

  • Servo Device Pipe: /dev/pigpio
  • Pin Number: #18
  • Up Stable Period (milliseconds): 250
  • Down Stable Period (milliseconds): 250
  • Pen Up Position (0-100): 75
  • Pen Down Position (0-100): 15
Add or edit another equipment page: